Aeris Elite T3 Operating Manual page 131

SET FREE DEPTH ALARM 3 (FDA3) Display,
information incl u des (Fig. 113) -
> Graphic FDA3.
> Set Point ON or OFF, fl a shing.
> Depth Set Point graphic val u e, fl a shing if ON is displ a yed.
> Symbol s MAX and FT (or M).
 Pressing and rel e asing the S button momentaril y (< 2
seconds) wil l toggl e the Set Point between ON and OFF.
> If set ON, the Depth val u e displ a yed wil l fl a sh.
 Pressing and rel e asing the S button momentaril y and
repeatedl y (< 2 sec each time) wil l step through the Set
Points from 50 to 330 FT (12 to 100 M) in increments of
10 FT (1 M) at a rate of 1 Set Point per press of the button.
 Pressing and hol d ing the S button wil l scrol l through the Set
Points at a rate of 4 Set Points per second until rel e ased.
 Pressing the A button momentaril y (< 2 sec) wil l accept the
Depth Setting and advance to SET FREE DEPTH ALARM 3.
 If set OFF, pressing the A button momentaril y wil l accept the
Setting and revert operation to the FREE SURF MAIN
screen.
 Depressing the M button for 2 seconds, or if no button is
pressed during a period of 2 minutes, the displ a y wil l revert
to the FREE SURF MAIN screen.
NOTE: The range
of avail a bl e FDA 3
Set Points begins at
the next FT/M val u e
greater than the
FDA 2 Al a rm Set
Point.
131