Set Po2 Alarm - Aeris Elite T3 Operating Manual

Setting the PO2
Al a rm to activate
before reaching the
Max al l o wed l i mit of
1.60 ATA is highl y
recommended.
4
SET PO ALARM
> Graphics PO2 and AtA
> Set Point val u e, fl a shing.
> Symbol MAX
 Pressing and rel e asing the S button momentaril y (< 2
seconds) wil l increase the Set Point from 1.20 (ATA) to 1.60
(ATA) in .10 (ATA) increments.
 Depressing the S button wil l scrol l through the Set Points at
a rate of 4 Set Points per second until it is rel e ased.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to the SET A
screen.
 Depressing the A and S buttons simul t aneousl y for 2
seconds wil l save the setting and revert to the SET A screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation wil l revert to
the NORM or GAUG SURF MAIN screen.
information incl u des (Fig. 34):