Aeris Elite T3 Operating Manual page 109

BUDDY PRESSURE CHECK (NORM only)
During NORM Dives, the El i te T3 can be used to check (displ a y)
Tank Pressure of 1 or 2 buddies whose TMT Link Codes (Serial
Numbers) have been entered as TMT 2 and TMT 3 in the El i te
T3's SET U menu.
NOTE: Use of the Buddy Pressure Check feature
cannot be performed when TMT -3 USE is set
for SELF (Gas Switching) or while operating in
GAUG Mode.
Access to Buddy Pressure Check screens during dives can onl y
be accompl i shed during the time that a NORM DIVE MAIN
screen is being displ a yed and cannot be performed whil e
viewing Al t ernate displ a ys or during the time that an Al a rm is
sounding.
BUDDY PRESSURE CHECK DURING DIVES
 Bring the El i te T3 within 3 feet (1 meter) of the Buddy's
Transmitter.
 Press and hol d the M button for 2 seconds whil e viewing a
NORM DIVE MAIN screen to access the TMT 2- 3 USE
screen displ a ying the Set Point bud (Fig. 93). If SELF is
displ a yed, indicating that the El i te T3 is set for FO2 GAS
Switching, a Buddy Pressure Check cannot be performed.
109