Set Fo2 Gas 2 - Aeris Elite T3 Operating Manual

SET FO GAS ,
> Graphic GAS2
> PO2 Al a rm Set Point with graphic PO2
> Symbol FO2 and FO2 Set Point val u e, fl a shing
> Tank 2 icon representing GAS 2
> Symbol NITROX (if set for a numerical val u e).
> Max Depth al l o wed for the PO2 Al a rm Set (if 21 to 100%)
 Depressing the S button whil e the FO2 Set Point is fl a shing wil l scrol l the Set Point
from AIR to 21 through 100% in 1% increments, at a rate of 8 per second.
 The scrol l wil l start at the FO2 GAS 1 Set Point and stop when the button is rel e ased,
or momentaril y at 50% (Fig. 23), then 80% (even if the button is hel d depressed).
 Depressing the S button wil l resume the scrol l through 100%, then stop at AIR (or 21
or the GAS 1 setting).
 Pressing and rel e asing the S button (< 2 seconds) wil l advance FO2 in increments of
1% per press of the button.
3
information incl u des:
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to SET FO2 GAS
3 with the Set Point fl a shing.
 Pressing and rel e asing the A button momentaril y and
repeatedl y (< 2 seconds) wil l step through the other SET F
screens.
 Depressing the A and S buttons simul t aneousl y for 2 seconds
wil l save the setting and revert to the SET F screen.
 Depressing the M button for 2 seconds or if no button action
for 2 minutes operation wil l revert to the SURF MAIN screen.