Set Fo2 Gas 3 - Aeris Elite T3 Operating Manual

SET FO GAS 3
> Graphic GAS3
> PO2 Al a rm Set Point with graphic PO2
> Symbol FO2 and FO2 Set Point val u e, fl a shing
> Tank 3 icon representing GAS 3
> Symbol NITROX (if set for a numerical val u e).
> Max Depth al l o wed for the PO2 Al a rm Set (if 21 to 100%)
 Depressing the S button whil e the FO2 Set Point is fl a shing wil l scrol l the Set Point
from AIR to 21 through 100% (Fig. 24) in 1% increments, at a rate of 8 per second.
 The scrol l wil l start at the FO2 GAS 2 Set Point and stop when the button is rel e ased,
or momentaril y at 50% then 80% (even if the button is hel d depressed).
 Depressing and hol d ing the S button wil l resume the scrol l through 100%, then stop at
AIR (or 21 or the GAS 2 setting).
 Pressing and rel e asing the S button (< 2 seconds) wil l advance FO2 in increments of
1% per press of the button.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to SET FO2
50% DEFAULT with the Set Point fl a shing.
 Pressing and rel e asing the A button repeatedl y (< 2
seconds each) wil l step through the other SET F screens.
 Depressing the A and S buttons simul t aneousl y for 2
seconds wil l save the setting and revert to the SET F screen.
 Depressing and hol d ing the M button for 2 seconds or if no
button is pressed for a period of 2 minutes operation wil l
revert to the SURF MAIN screen.
information incl u des:
33