Elite T3 Battery Status; Transmitter Status - Aeris Elite T3 Operating Manual

Elite T3 BATTERY STATUS

> Graphics El i te T3 and bAt
> Graphic Good (or Lo)
> Battery icon, if a Low Battery arning Condition exists.
Fl a shing if an Al a rm Condition exists.
Transmitters (referred to as TMTs) that are active and Linked wil l
transmit signal s conveying Tank Pressure and Battery Status for
displ a y on the Status screens. If a TMT is not active or active but
not Linked, the Status screen(s) wil l displ a y Not Avail a bl e .

TRANSMITTER STATUS

> Graphics TMT1 (then TMT2 and TMT3), identifying the
reporting Transmitter, and bAt.
> Graphic Good (or Lo), or NotAvAil (if not active/l i nked)
> Battery icon, if a Low Battery arning Condition exists.
Fl a shing if an Al a rm Condition exists.
> Tank Pressure for the TMT reporting and symbol PSI (or
BAR).
REMINDER: If TMT -3 USE is set for BUD (Buddy
Pressure Check), TMT and TMT3 screens will not
display Battery Status (only Pressure).
, information incl u des (Fig. 18):
, information incl u des (Fig. 19 A/B):
7