Set Tmt 2 (Or Bud 1) - Aeris Elite T3 Operating Manual

SET TMT (or BUD 1)
> Graphics TMT2 (or BUD1) and ON (or OFF) fl a shing.
> Set Point (Transmitter's Serial Number (Link Code).
 Pressing and rel e asing the S button momentaril y (< 2
seconds) wil l toggl e between ON and OFF.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l accept the ON/OFF sel e ction.
 If OFF is sel e cted, SET TMT 3 (or BUD 2) wil l be bypassed
and the operation wil l revert to the SET U screen.
 If ON is sel e cted, the first (l e ft) digit of the Code wil l fl a sh.
 Pressing and rel e asing the S button repeatedl y (< 2 seconds
each) wil l increase the First Digit from 0 to 9 in increments
of 1.
 Depressing the S button wil l scrol l through the Set Points at
a rate of 4 per second.
 Pressing and rel e asing the A button (< 2 seconds) wil l
accept the First Digit of the Code and/or advance to the
Second Digit which wil l be fl a shing.
 Pressing and rel e asing the S button wil l increase the Second
Digit from 0 to 9 in increments of 1.
 Depressing the S button wil l scrol l through the Set Points at
a rate of 4 per second.
 Pressing and rel e asing the A button (< 2 seconds) wil l
accept the Second Digit of the Code and/or advance to the
Third Digit which wil l be fl a shing.
information incl u des (Fig. 44):
53