Set Wet Activation - Aeris Elite T3 Operating Manual

44

SET WET ACTIVATION

> Graphic ET
> Set Point graphic ON (or OFF) fl a shing.
 Pressing and rel e asing the S button wil l toggl e between ON
and OFF.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to the SET
UNITS screen with the Set Point fl a shing.
 Pressing and rel e asing the A button repeatedl y (< 2
seconds each) wil l step through the other SET U screens.
 Depressing the A and S buttons simul t aneousl y for 2
seconds wil l save the setting and revert to the SET U screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation wil l revert to
the NORM or GAUG SURF MAIN screen.
HINT: To change this setting while operating in
FREE Mode, first access the NORM SURF Mode.
information incl u des (Fig. 36):