Set Fo2 50% Default; Set A Roup (Norm/Gaug Alarms); Set A Sequence - Aeris Elite T3 Operating Manual

34
SET FO 50% DEFAULT
> Graphics DFLT and 50
> Set Point graphic OFF (or ON), fl a shing.
> Symbol s FO2 and NITROX.
 Pressing and rel e asing the S button (< 2 seconds) wil l
toggl e between OFF and ON.
 Pressing and rel e asing the A button (< 2 seconds) wil l save
the setting and revert to the SET F screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation wil l revert to
the NORM or GAUG SURF MAIN screen.
SET A GROUP (NORM/GAUG ALARMS)

Set A Sequence:

SET A > Audibl e > Depth > EDT > NIBG > DTR > Turn Pressure
> End Pressure > PO2
> The SET A Group can al s o be set/changed using the PC
Settings Upl o ad program.
> SET A items do not strike Al a rms in FREE Dive Mode.
> SET A Settings remain at the val u es set until changed.
> Depressing the A and S buttons simul t aneousl y for 4
seconds whil e NORM or GAUG SURF MAIN is displ a yed
wil l access SET A identified by the graphic SETA (Fig. 26).
information incl u des (Fig. 25):