Aeris Elite T3 Operating Manual page 143

Elite T3 Battery Hatch Removal
 Locate the Battery Compartment on the back of the modul e .
 hil e appl y ing steady inward pressure on the cl e ar Battery
Hatch, rotate the Hatch Ring cl o ckwise 10 degrees by
pressing on the upper/right arm of the Ring with a smal l
bl a de screwdriver (Fig. 125).
NOTE: If available, an adjustable face spanner
tool or pointed pliers can be used by inserting
the tips of the tool in the small holes in the Ring
(Fig. 1 6).
 Lift the Hatch Ring up and away from the Housing.
 Remove the cl e ar Battery Hatch.
Elite T3 Battery Removal
 Remove the Retaining Bar l o cated across the l o wer portion of
the Battery (Fig. 127a).
 Remove the Hatch O- r ing. DO NOT use tool s
 Using care not to damage the Battery Contacts (Fig. 127 b/
c), sl i de the Battery up and out of the right side of the Battery
Compartment.
NOTE: DO NOT allow a metal object to short
circuit the top of the Battery which is positive (+)
to the negative ( - ) contact of the Compartment.
b
a
c
143