Aeris Elite T3 Operating Manual page 125

> If the CD Timer is OFF, the CD Time (min:sec) previousl y set wil l be displ a yed with the
col o n sol i d.
 Pressing and rel e asing the S button momentaril y (< 2 seconds) wil l toggl e between
ON and OFF.
> If a Time has been set, a toggl e from OFF to ON wil l start the CD Timer indicated by
the col o n fl a shing.
 Press the S button to activate the SmartGl o Backl i ght.
 Pressing/rel e asing the A button momentaril y (< 2 seconds) wil l revert the Displ a y to
the FREE SURF MAIN screen.
 Depressing the A and S buttons simul t aneousl y for 2 seconds whil e viewing the CD
Timer Status screen when the CD Timer is OFF wil l access the SET CD TIMER screen
with the MINUTE Set Point fl a shing.
NOTES: Once the CD TIMER has been Set and Started (by selecting
ON), it will continue to run in the background while on the surface
until turned OFF (stopped) or the Time reaches 0:00 at which time the
Alarm will strike (3 short beeps 3 times), the message TIMR will be
displayed, and the CD TIMER will revert to OFF.
Upon descending to 5 FT/1.5 M for 5 seconds (i.e., entry into FREE
DIVE Mode), CD TIMER operation will continue, if in progress.
During a dive, the CD TIMER can be turned OFF (stopped) and ON
(started), but not Set.
1 5