Aeris Elite T3 Operating Manual page 107

TO SWITCH FO FROM GAS 1 TO GAS
 Depressing the M button for 2 seconds whil e viewing the
GAS 2 Switch Preview Displ a y wil l Switch the El i te T3's
FO2 from GAS 1 to GAS 2 and the El i te T3's Receiver from
TMT 1 to TMT 2 (if active).
 After the switch is made, the NORM DIVE MAIN Displ a y
wil l represent GAS 2 (Fig. 91). If TMT 2 is active, Air Time
Remaining is then cal c ul a ted based on Tank 2's Pressure.
TO SWITCH FO FROM GAS BACK TO GAS 1
A Switch Back to FO2 GAS 1 can be performed, as fol l o ws:
 Press/rel e ase the M button momentaril y (< 2 seconds) to
step through the Gas Switch Preview screens and access
the GAS 1 Switch Preview screen.
 Depress the M button for 2 seconds whil e the GAS 1 Switch
Preview screen is displ a yed to switch the El i te T3 from GAS
2 back to GAS 1 and the El i te T3's Receiver from TMT 2
back to TMT 1 (if active).
 After the switch is made, the NORM DIVE MAIN Displ a y
wil l represent GAS 1. If TMT 1 is active, Air Time
Remaining is then cal c ul a ted based on Tank 1's Pressure.
When Switching to a
GAS (FO2) associated
with a ank that does
not have an active
M , the procedures
and displays will be
the same without
displaying ank
Pressure.
107