Time, Date, Temperature Displays - Aeris Elite T3 Operating Manual

Time, Date, Temperature Displays

b
are
Time of Day and NORM/GAUG Mode displays
shown in hour:minute format (i.e., 1:16 represents 1 hour and
16 minutes, not 116 minutes).
are shown in minute:second
FREE Dive Mode displays
format. The col o n that separates hours and minutes (minutes and
a
seconds) bl i nks once per second when the displ a y is indicating
real time (e.g., Surface Interval , El a psed Dive Time), and is sol i d
(non- b l i nking) when times are cal c ul a ted projections (e.g., Time
to Fl y , Pl a n).
The displ a y, at the bottom of the screen, has the
Primary Time
l a rgest digits of the displ a y (Fig. 12a). Another displ a y
time
(Fig. 12b) is l o cated in the middl e row. Both displ a ys are
identified by the symbol TIME.
There is an Al t ernate Displ a y providing
Day of Week, Tem-
. This common displ a y (Fig. 13)
perature, and Time of Day
can be accessed whil e operating in NORM, GAUG, or FREE
a
Modes whil e on the Surface and during Dives.
is displ a yed onl y to identify dives when they are accessed
Date
in the LOG Mode. hen set for Imperial Units, Month is to the
l e ft of Day (Fig. 14a) separated by a decimal point (month.day).
hen set for Metric, Month is to the right of Day (day.month).
1