Norm Surf Main - Aeris Elite T3 Operating Manual

The El i te T3 wil l enter POST DIVE SURFACE MODE fol l o wing a
dive upon ascent to 4 FT (1.2 M). The Surface Interval Time
col o n wil l fl a sh during the first 10 minutes after a NORM/GAUG
dive (Fig. 16), or first 1 minute after a FREE dive.
During the first 2 hours after a dive, the SURF MAIN screen for
the Operating Mode sel e cted prior to the dive (NORM, GAUG,
or FREE) remains on displ a y as the Defaul t SURF MAIN screen.

NORM SURF MAIN

> Graphic NORM al t ernating with the Al t itude Level graphic
SEA (or EL2 through EL13) and ET (if the unit is wet),
each On 3 seconds then 1/4 second bl a nk.
> Battery icon if an El i te T3 Low Battery arning Condition
exists, fl a shing if Too Low
> Tank Pressure and symbol PSI (or BAR), if the Receiver is
successful l y Linked with an active Transmitter.
> Symbol DIVE and Number of that dive (0 if no dive has
been made yet).
> Symbol s TIME and SURF, and Surface Interval (hr:min).
> NITROX symbol , if any GAS is set for a Nitrox dive.
> Tank 1 icon representing GAS 1, which is the defaul t start
Gas and defaul t Gas 10 minutes after a dive.
> NIBG if any after a NORM or FREE dive.
> O2BG if any after a NORM Nitrox dive.
, information provided incl u des (Fig. 17):
5