Set Edt (Elapsed Dive Time) Alarm - Aeris Elite T3 Operating Manual

SET EDT (ELAPSED DIVE TIME) ALARM

Information incl u des (Fig. 29):
> Graphic EDT
> Symbol s DIVE and TIME.
> Set Point val u e (hr:min), fl a shing.
 Pressing and rel e asing the S button momentaril y (< 2
seconds) wil l increase the Set Point from 0:10 to 3:00
(hours:minutes) in 5 minute (:05) increments.
 Depressing the S button wil l scrol l through the Set Points at
a rate of 4 Set Points per second until it is rel e ased.
 Pressing and rel e asing the A button momentaril y (< 2
seconds) wil l save the setting and/or advance to the SET
NIBG (Nitrogen Loading Bar Graph) ALARM screen with
the Set Point fl a shing.
 Pressing and rel e asing the A button repeatedl y (< 2
seconds each) wil l step through the other SET A screens.
 Depressing the A and S buttons simul t aneousl y for 2
seconds wil l save the setting and revert to the SET A screen.
 Depressing he M button for 2 seconds or if no button is
pressed for 2 minutes operation wil l revert to the NORM or
GAUG SURF MAIN screen.
FREE Mode has a separate EDT Al a rm.
37