Pdps; Fly Mode - Aeris Elite T3 Operating Manual

64
information incl u des (Fig. 53A/B):

PDPS

> Pl a n Depth val u es and symbol F (feet) or M (meters).
> PO2 Al a rm Set Point and graphic PO2, if set for Nitrox.
> Symbol s TIME and NDC (or O2 if in control ) .
> Dive Time (HR:MIN) al l o wed for the FO2 set for GAS 1.
> Tank 1 icon representing GAS 1.
> Symbol NITROX, if set for a Nitrox dive.
> Maximum Depth al l o wed and symbol s MAX and FT (or M).
 Press and rel e ase the S button momentaril y and repeatedl y
(< 2 seconds each time) to increase the Pl a nned Depth in
increments of 10 FT (3 M), displ a ying the information one
screen at a time.
 Depressing and hol d ing the M button for 2 seconds to
revert to the NORM SURF MAIN screen.

FLY MODE

Time to Fl y is a counter that begins counting down 10 minutes
after surfacing from a dive from 23:50 to 0:00 (hr:min).
Two hours after a NORM or FREE dive, the FLY screen wil l
al t ernate with the SAT screen until the El i te T3 shuts Off 24 hours
after the l a st dive. hen operating in FREE Mode, the FLY
screen can be viewed by first accessing the NORM SURF MAIN
screen.