Do you have a question about the XR2 and is the answer not in the manual?
Questions and answers
Gary
May 5, 2025
Forgot my manual on vacation. How can I get my RX2 set up for a nitrox dive tomorrow?
1 comments:
Mr. Anderson
May 18, 2025
To set up your Aeris XR2 for a nitrox dive, follow these steps:
1. Enter the set-up mode on the XR2. 2. Navigate to the gas mix or nitrox setting menu. 3. Input the oxygen percentage (FO2) for your gas mix (e.g., 32%). 4. Set the maximum partial pressure of oxygen (PO2), typically 1.4 or 1.6 ATA depending on your dive plan. 5. Save the settings and exit the menu. 6. Confirm the display shows nitrox mode with the correct FO2 before diving.
Practice setup using dry runs or simulators like e-diving or iDive Computer may help you get familiar with the process.
This answer is automatically generated
Gary
May 5, 2025
Forgot my RX2 manual on vacation. How ham I get it set up for a Norris dive tomorrow?
Page 2
Still, using the XR2, just as using the U.S. Navy (or other) No Decompression Tables, is no guarantee of avoiding de- compression sickness, i.e. the bends....
Need help?
Do you have a question about the XR2 and is the answer not in the manual?
Questions and answers
Forgot my manual on vacation. How can I get my RX2 set up for a nitrox dive tomorrow?
To set up your Aeris XR2 for a nitrox dive, follow these steps:
1. Enter the set-up mode on the XR2.
2. Navigate to the gas mix or nitrox setting menu.
3. Input the oxygen percentage (FO2) for your gas mix (e.g., 32%).
4. Set the maximum partial pressure of oxygen (PO2), typically 1.4 or 1.6 ATA depending on your dive plan.
5. Save the settings and exit the menu.
6. Confirm the display shows nitrox mode with the correct FO2 before diving.
Practice setup using dry runs or simulators like e-diving or iDive Computer may help you get familiar with the process.
This answer is automatically generated
Forgot my RX2 manual on vacation. How ham I get it set up for a Norris dive tomorrow?