Ect Sensor Inspection; Ect Sensor Removal/Installation; Ap Sensor Inspection; Ap Sensor Removal/Installation - Suzuki GSX-R750 Service Manual

Hide thumbs Also See for GSX-R750:

Table of Contents

4-82 FI SYSTEM AND INTAKE AIR SYSTEM

ECT SENSOR INSPECTION

The engine coolant temperature sensor is installed at the rear

side of the cylinder head. ( 4-40 and 5-8)

( 5-8 and -9)

The atmospheric pressure sensor is located beneath the left side

of the seat rail. ( 4-42)

• Lift and support the fuel tank. ( 4-51)

• Disconnect the coupler 1 and the AP sensor hose 2.

• Remove the AP sensor by removing the screws.

• Installation is in the reverse order of removal.

The tip over sensor is located in ahead of the rear fender.

• Remove the front seat. (6-8)

• Disconnect the coupler 1 and remove the TO sensor from the

fuel tank bracket.

• Installation is in the reverse order of removal.

When installing the TO sensor, bring the "UPPER" letter on it to

Table of Contents