Mazda RX-8 Workshop Manual page 1656

< Previous Next >
2011 - RX-8 - Brakes
DTC B2741, C2768, U2516 [DYNAMIC STABILITY CONTROL (DSC)]
B2741, C2768,
DTC
U2516
DETECTION
CONDITION
FAIL-SAFE
POSSIBLE
CAUSE
Diagnostic procedure
STEP
PERFORM COMBINED SENSOR
1 INITIALIZATION
Combined sensor system
B2741
Sensor malfunction signal from combined sensor is
detected continuously for 100 ms.
Type of combined sensor is different from specification,
or not within set range.
C2768
Signal which indicates combined sensor is under
initialization is transmitted from combined sensor.
U2516
Number of signal transmission from combined sensor is
wrong.
Check sum error is detected in CAN communication
signal between combined sensor.
Inhibits TCS control and DSC control, and illuminates DSC indicator light.
(If error is detected during a TCS control, inhibits TCS control after
finishing the control.)
Combined sensor malfunction
INSPECTION
After the initialization procedure for the combined
ACTION