®
Invacare
- TDX-SP / TDX-SP N
●
You will be able to see the strip fuses (2) once the fuse holder (1) is open.
●
If the strip fuse has blown, you must first ascertain and rectify the cause of the fault.
●
The main fuse may only be replaced once the fault has been rectified.
●
Remove the strip fuse nuts (3) with an 8 mm socket spanner.
●
Replace the strip fuse.
Fitting the main fuse:
●
Refit all the parts again in reverse order.
●
To conclude, check all the mobility aid functions.
8.2.6
Replacing the main fuse (TDX-SP N)
Note
To replace the fuse, the battery cable with the fuse attached to it must be replaced.
●
Replace the battery cables, as described in chapter 8.2.3.
SERVICE MANUAL
47