Replacing The Rear Light Complete - Invacare TDX-SP Service Manual

®
Invacare - TDX-SP / TDX-SP N
8.4.5

Replacing the rear light complete

Requirements:
● Phillips screwdriver size 2
● socket spanner, 8 mm
Removing the rear light
● Remove the rear panel as described in Chapter 8.1.2.
● Carefully note the location of the cable and the connection locations of the various plugs.
Either mark each plug and socket, or take a photograph with a digital camera.
● On the illustration you can see the battery plug (1), the lighting PCB (2) for the electronic
module (3), the optional cross connector (4) and the optional actuator module (5).
● Loosen the cable leading to the lighting PCB from the rear light affected.
● Remove all cable ties and pull the cable out of the mobility aid.
SERVICE MANUAL
57