®
Invacare
- TDX-SP / TDX-SP N
8.10.2 Replacing the electrically operated centre-mounted legrest
WARNING: Danger of crushing!
The legrest is very heavy. Danger of injury to hands and feet!
Pay attention to the heavy weight.
Requirements:
● 6 mm Allen key
● Side cutting pliers
● Cable ties
Uninstalling the electrically operated centre-mounted legrest:
●
If possible, raise the lifter to the highest position.
●
If possible, tip the wheelchair with the tilt module as far backwards as it will go.
●
Switch the electronic control system off.
The actuator module for the lifter and the tilt actuator are mounted to the front edge of the seat
frame.
●
Completely remove both knurled head screws (1) including the washers.
●
Remove the cover (2).
●
Pull the plug of the legrest actuator out of the actuator module.
SERVICE MANUAL
95