®
Invacare
- TDX-SP / TDX-SP N
8.15
Replacing the splash guard
Requirements:
● 5/6" Allen key
● 7/8" Allen key
● two long wooden blocks, min. 14 x 14 x 30 cm
● torque wrench 0 - 20 Nm (or similar)
● torque wrench 5 - 25 Nm (or similar)
Removing the splash guard:
●
Remove the drive wheel as described in Chapter 8.13.1.
●
Undo and remove the three 5/6" Allen screws (1).
●
Remove the splash guard (2) from the walking beam (3).
Refitting the splash guard:
●
Refit the parts in reverse order.
●
Tighten the splash guard screws to 4.5 Nm.
SERVICE MANUAL
115