Replacing The Rubber Bumper - Invacare TDX-SP Service Manual

SERVICE MANUAL
8.14

Replacing the rubber bumper

Note
Invacare® recommends that you replace all the rubber bumpers as soon as one needs
replacing.
Requirements:
● 5/16" socket spanner
● 7/8" Allen key
● two long wooden blocks, min. 14 x 14 x 30 cm
● torque wrench 5 - 25 Nm (or similar)
Removing the rubber bumper:
● Remove the drive wheel as described in Chapter 8.13.1.
● Undo and remove the 5/16" nut (3).
● Remove the washer (2).
● Remove the rubber bumper (1).
Refitting the rubber bumper:
● Refit the parts in reverse order.
114
®
Invacare - TDX-SP / TDX-SP N