Table of Contents
Advertisement
SERVICE MANUAL
8.16.2.2 Replacing the guide bush
Removing:
●
Remove the guide bush (1) from the gas cylinder piston (2).
Refitting:
●
Apply a little Loctite 242 to the end of the gas cylinder piston in the area marked (A) on the
graphic. It is imperative that you do NOT apply Loctite to the locations marked (B) and (C)!
●
Push the new guide bush onto the gas cylinder piston until the end of the gas cylinder piston
touches the release head (5).
8.16.2.3 Replacing the gas cylinder
Removing:
●
Remove the guide bush (1) from the gas cylinder piston (2).
●
Remove the guide block fixing (3) from the gas cylinder piston.
●
Remove the clamping support (4) from the gas cylinder piston.
Refitting:
●
Refit the clamping support and guide block fixing to the new gas cylinder piston in reverse
order.
●
Apply a little Loctite 242 to the end of the gas cylinder piston in the area marked (A) on the
graphic. It is imperative that you do NOT apply Loctite to the locations marked (B) and (C)!
●
Push the guide bush onto the gas cylinder piston until the end of the gas cylinder piston
touches the release head (5).
120
®
Invacare
- TDX-SP / TDX-SP N
Hide quick links:
Advertisement
Table of Contents
