®
Invacare
- TDX-SP / TDX-SP N
8
Repair work
CAUTION!
Danger of injury and damage to property, if the maximum speed reduction on a
wheelchair with a lifter does not function correctly!
The wheelchair's control unit must reduce the maximum possible speed as soon as the
lifter is raised.
● Test the maximum speed reduction for correct function after any maintenance work or
modifications to the wheelchair.
8.1
Covers without lifter
8.1.1
Opening the front panel
Requirements:
● Phillips screwdriver size 2
● 5/8" Allen key
Dismantling the front cover panel:
●
Remove the legrests.
●
Remove the two bolts (5) on the front cover panel (4) with a 5/8" Allen key.
●
Pull the front cover panel upwards and remove it.
Refitting the front cover panel:
●
Refit the parts in reverse order.
●
Now tighten all the screws finger-tight again.
SERVICE MANUAL
35