Invacare TDX-SP Service Manual page 63

®
Invacare - TDX-SP / TDX-SP N
● Pull the plug (1) out of the actuator module.
● Pull the plug (2) out of the light module.
● Pull the plug (3) out of the electronic module.
● Loosen both the 8 mm nuts (1).
● Remove the module carefully.
● Replace the defective module.
Refitting the electronic module:
● Refit the various modules in reverse order.
● Refit the cross-connector if this is fitted.
● Plug all the plugs into their old positions.
● If you have replaced a DX, ACS or ACS 2 Electronic module, select the drive
programmatically in Chapter 8.6.3.
SERVICE MANUAL
63