®
Invacare
- TDX-SP / TDX-SP N
Refitting the seat carrier:
●
Hold the seat support (1) firmly while you fit the bolts (3) and the metal plates (2).
●
Screw the bolts in but do not tighten them.
●
Use the protractor to adjust the seat carrier to the required angle.
●
Tighten the bolts to 18 Nm.
●
Refit the batteries including battery carrier as described in Chapters 8.2.2/8.2.3 and 8.2.1.
●
Refit the seat.
●
Adjust the anti-tip system as described in Chapter 8.16.5.
SERVICE MANUAL
73