®
Invacare
- TDX-SP / TDX-SP N
8.4.2
Replacing the front headlight complete
Requirements:
● Phillips screwdriver size 2
● oblique pliers
● cable ties
Removing the front headlight:
●
Remove the rear panel as described in Chapter 8.1.2.
●
Carefully note the location of the cable and the connection locations of the various plugs.
Either mark each plug and socket, or take a photograph with a digital camera.
●
On the illustration you can see the battery plug (1), the lighting PCB (2) for the electronic
module (3), the optional cross connector (4) and the optional actuator module (5).
●
Loosen the cable leading to the lighting PCB from the front headlight affected.
●
Remove all cable ties and pull the cable out of the mobility aid.
SERVICE MANUAL
53