®
Invacare
- TDX-SP / TDX-SP N
●
Lift the tilt actuator ((5) slightly.
●
Pull the lifter actuator bolts (4) under the tilt actuator and out of the guide.
●
Remove the retaining ring (1) on the rear bolts (3) on the lifter actuator (2) using the retaining
ring pliers.
●
Push the bolts out of the guides.
●
Remove the actuator from the lifter module.
Refitting the lifter actuator:
●
Refit all parts in the reverse sequence
●
Carry out a performance test.
SERVICE MANUAL
93