Invacare TDX-SP Service Manual page 44

SERVICE MANUAL
Uninstalling batteries/battery cables:
● Remove the batteries, as described in chapter 8.2.1.
Positive terminal (+):
● Remove the cable ties (1) with side cutting pliers.
● Lift the battery terminal cap (2) off and move it up the cable and out of the way.
● Use an 11 mm socket wrench to loosen the battery terminal screw (3).
● Remove the battery terminal screw together with both washers and the cable lug (5) from the
battery terminal (4).
Negative terminal (-):
● Repeat the steps of the procedure for the positive terminal on the negative terminal of the
battery.
● Replace the batteries and/or the battery cables.
Installing batteries/battery cables:
● Assemble the parts in reverse order. Connect the negative terminal first, then the positive
terminal.
● Make sure the battery box sockets and plugs are correctly installed. A schematic showing the
correct positions can be found in the battery box cover.
● Carefully reposition the battery terminal caps and secure them with a cable tie to prevent them
from possibly slipping out of place.
44
®
Invacare - TDX-SP / TDX-SP N