Replacing The Rear Bulbholder - Invacare TDX-SP Service Manual

®
Invacare - TDX-SP / TDX-SP N
8.4.6

Replacing the rear bulbholder

Requirements:
● Phillips screwdriver size 2
● socket spanner, 8 mm
● socket spanner, 13 mm
Dismantling the bulbholder:
● Remove the complete rear light as described in Chapter 8.4.4.
● Undo the two retaining screws (2) with a 13 mm socket spanner and remove the screws
complete with washers.
● Replace the bulbholder (1).
Refitting the bulbholder:
● Refit the parts in reverse order.
● Check all vehicle functions.
SERVICE MANUAL
59