®
Invacare
- TDX-SP / TDX-SP N
8.20.2 Removing the rear wheel suspension – alternative method
Requirements:
● more wooden blocks or
● joiner's clamps
●
Carry out the following steps if only one of the two bolts (4) can be undone.
●
Ensure that the rear springs are compressed:
Block method:
● Raise the suspension arms and replace the wooden blocks underneath them until the
springs are compressed.
Clamp method:
● Lower the suspension arms downwards as far as possible.
● Remove the rubber caps (9).
● Press the springs together with a joiner's clamp or similar clamp.
SERVICE MANUAL
149