Replacing The Wheels On Double-Sided Wheel Forks - Invacare TDX-SP Service Manual

®
Invacare - TDX-SP / TDX-SP N

8.12.3 Replacing the wheels on double-sided wheel forks

Requirements:
● 7/16" socket spanner
● 7/16" jaw spanner
● torque wrench 5 - 25 Nm (or similar)
Removing the wheel:
● Loosen the nut (2) with a 7/16" socket spanner.
● Remove the bolt (6) with a 7/16" socket spanner.
● Remove the two washers (3) and (5).
● Remove the wheel (4).
● Replace any defective parts.
Refitting the wheel:
● Refit the parts in reverse order.
● Tighten the bolt (6) and the nut (2) to 18 Nm.
SERVICE MANUAL
105