SERVICE MANUAL
Removing the electronic module:
●
Remove the rear panel as described in Chapter 8.1.2.
●
Carefully note the location of the cable and the connection locations of the various plugs.
Either mark each plug and socket, or take a photograph with a digital camera.
●
On the illustration you can see the battery plug (1), the optional lighting PCB (2) for the
electronic module (3) and the optional actuator module (5).
●
You can also see the optional cross connector between the rear wheel suspension (4).
●
Dismantle the cross-connector (if fitted):
Undo and remove the four Allen screws (1) with a 5/16" Allen key.
●
Remove the cross-connector (3).
62
®
Invacare
- TDX-SP / TDX-SP N