SERVICE MANUAL
8.12
Wheel forks front/rear
8.12.1 Replacing the wheel fork
Requirements:
● Phillips screwdriver size 2
● 5/8" socket spanner
Removing the wheel forks:
●
Undo the Philips screw (2).
●
Take the cover cap (2) off the castor housing (3).
●
Loosen the nut (1) with a 5/8" socket spanner.
●
Remove the washer (2).
●
Pull the wheel fork (8) and the spacer (7) away downwards.
●
If necessary, you should also remove the ball-bearings (3) and (6) in addition to the tolerance
rings (4) and (5).
102
®
Invacare
- TDX-SP / TDX-SP N