SERVICE MANUAL
Refitting the motor/transmission clutch:
●
Place the new clutch (2) on the motor axle (3). Note the position of the groove.
●
Push the motor carefully into the transmission. Observe the position of the groove in the
transmission axle (4). If necessary, rotate the transmission axle into the right position.
●
Refit the two M6 Allen screws (1) including washers (2). Tighten the Allen screws to 8.5 Nm.
●
Refit the motor/transmission unit as described in Chapter 8.19.1.
140
®
Invacare
- TDX-SP / TDX-SP N