Replacing An Electric Legrest Actuator - Invacare TDX-SP Service Manual

®
Invacare - TDX-SP / TDX-SP N

8.10.3 Replacing an electric legrest actuator

WARNING: Danger of crushing!
The legrest is very heavy. Danger of injury to hands and feet!
 Pay attention to the heavy weight.
Requirements:
● 1/2" socket wrench
● 3/8" Allen key
● Side cutting pliers
● Cable ties
Uninstalling the electrically operated legrest:
● If possible, raise the lifter to the highest position.
● If possible, tip the wheelchair with the tilt module as far backwards as it will go.
● Switch the electronic control system off.
The actuator module for the lifter and the tilt actuator are mounted to the front edge of the seat
frame.
● Completely remove both knurled head screws (1) including the washers.
● Remove the cover (2).
● Pull the plug of the legrest actuator out of the actuator module.
SERVICE MANUAL
97