Profile Selection With Remote Rem 550 - Invacare TDX-SP Service Manual

SERVICE MANUAL
8.6.5.2

Profile selection with remote REM 550

● Plug the plug into the remote or the ACS 2 controller.
● The display (2) shows that you need to select a profile.
● Use the bottom rocker switch (3) to select where the required controller profile is saved.
I = remote
II = electronic module
● The display will show which profile you have selected.
● Press the "Horn" (4) and "+" (1) buttons on the speed selection and hold them down for 3
seconds to confirm the selection.
● The system will switch itself off and restart automatically. During the process, the selected
profile will be saved both in the remote and in the electronic module.
70
®
Invacare - TDX-SP / TDX-SP N