®
Invacare
- TDX-SP / TDX-SP N
Refitting the wheel fork:
●
If you removed them, replace the tolerance rings (4) and (5) and the ball-bearings (3) and (6).
●
Place the spacer (7) on the wheel fork (8).
●
Insert the wheel fork from underneath.
●
Fit the washer (2) from above.
●
Fit the nut (1) and tighten it with a 5/8" socket spanner loosely so that the wheel forks can just
turn.
●
Adjust the castor as described in Chapter 8.12.2.
●
Place the cover cap (1) on the castor housing (3).
●
Tighten the Philips screw (2) finger-tight.
SERVICE MANUAL
103