Configure The Switch's Ip Address And Default Gateway - TP-Link T1600G-52TS User Manual

Accessing the Switch
2.4

Configure the Switch's IP Address and Default Gateway

If you want to access the switch via a specified port (hereafter referred to as the access
port), you can configure the port as a routed port and specify its IP address, or configure
the IP address of the VLAN which the access port belongs to.
■ Change the IP Address
By default, all the ports belong to VLAN 1 with the VLAN interface IP 192.168.0.1.
The following example shows how to change the switch's default access IP address
192.168.0.1.
1) Go to L3 FEATURES > Interface . The default access IP address in VLAN 1 in the
Interface List. Click Edit IPv4 to modify VLAN1's IP address.
Figure 2-7 Change VLAN1's IP Address
2) Choose the IP Address Mode as Static. Enter the new access address in the IP
Address field and click Apply. Make sure that the route between the host PC and the
switch's new IP address is available.
Figure 2-8 Specify the IP Address
3) Enter the new IP address in the web browser to access the switch.
Web Interface Access
User Guide 8