Maximum-Paths; Redistribute - TP-Link JetStream T3700G-52TQ Cli Reference Manual
52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for JetStream T3700G-52TQ:
- User manual (426 pages) ,
- Installation manual (37 pages) ,
- Installation manual (28 pages)
Table of Contents
Advertisement
T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Configure the network 192.168.0.0/24 in the area 0.0.0.0:
T3700G-52TQ(config)# router ospf 1
T3700G-52TQ(config-router)# network 192.168.0.0 255.255.255.0 area
0.0.0.0
46.4 maximum-paths
Description
The maximum-paths command is used to configure the maximum number of
the equal-cost multipath routings. To restore to default value, please use the
no maximum-paths command.
Syntax
maximum-paths
no maximum-paths
Parameter
number
ranging from 1 to 16. The default value is 16.
Command Mode
Router Configuration Mode
Example
Configure the maximum number of the equal-cost multipath routings as 2:
T3700G-52TQ(config)# router ospf 1
T3700G-52TQ(config-router)# maximum-paths 2
46.5 redistribute
Description
The redistribute command is used to configure the ASBR to redistribute the
external routes from other routing protocols to the OSPF domain in type-5
LSAs. To cancel this redistribution, please use the no redistribute command
without any optional parameters. To restore the certain optional parameters
number
—— The maximum number of the equal-cost multipath routings,
401
Advertisement
Table of Contents
