Web Interface Access; Login - TP-Link T1600G Series Configuration Manual

Accessing the Switch
2

Web Interface Access

You can access the switch's web interface through the web-based authentication.
The switch uses two built-in web servers, HTTP server and HTTPS server, for user
authentication.
The following example shows how to login via the HTTP server.
2.1

Login

To manage your switch through a web browser in the host PC:
1) Make sure that the route between the host PC and the switch is available.
2) Launch a web browser. The supported web browsers include, but are not limited to, the
following types:
 IE 8.0, 9.0, 10.0, 11.0
 Firefox 26.0, 27.0
 Chrome 32.0, 33.0
3) Enter the switch's IP address in the web browser's address bar. The switch's default IP
address is 192.168.0.1.
Figure 2-1 Enter the switch's IP addresss in the browser
4) Enter the username and password in the pop-up login window. Use admin for both
username and password in lower case letters.
Figure 2-2 Login authentication
5) The typical web interface displays below. You can view the switch's running status and
configure the switch on this interface.
Web Interface Access
Configuration Guide 5