Show Snmp-Server - TP-Link T2500G-10TS Cli Reference Manual

Syntax
rmon statistics
[ status { underCreation | valid }]
no rmon statistics
Parameter
index
in the format of 1-3,5.
port
owner-name
characters. By default, it is "monitor".
status —— The status of the statistics entry, either "underCreation" or
"valid". "underCreation" means this entry won't take effect until it is modified
to "valid"; "valid" means this entry takes effect immediately after it is created.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the statistics entries 1-3 with the statistics port as 1/0/1, owner as
owner1 and status as valid:
T2500G-10TS(config)#rmon statistics 1-3 interface gigabitEthernet 1/0/1
owner owner1 status valid

33.17 show snmp-server

Description
The show snmp-server command is used to display SNMP configuration
globally.
Syntax
show snmp-server
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
index
interface gigabitEthernet
index
—— The index number of the statistics entry, ranging from 1 to 65535,
—— The statistics port number, in the format of 1/0/1.
—— The creator of the event entry, ranging from 1 to 16
304
port owner-name
[ owner ]