Rmon Event - TP-Link JetStream TL-SL5428E Cli Reference Manual

Parameter
index —— The index number of the entry, ranging from 1 to 12, in the format of
1-3,5.
port —— The Fast/Gigabit Ethernet port number.
seconds —— The interval to take samplings from the port, ranging from 10 to
3600 in seconds. By default, it is 1800.
owner-name —— The owner of the history sample entry, ranging from 1 to 16
characters. By default, it is "monitor".
Command Mode
Global Configuration Mode
Example
Configure the sample port as 2 and the sample interval as 100 seconds for the
entry 1-3:
TL-SL5428E(config)#rmon history 1-3 interface fastEthernet 1/0/2 interval
100 owner owner1

rmon event

Description
The rmon event command is used to configure the entries of SNMP-RMON
Event. To return to the default configuration, please use no rmon event
command. Event Group, as one of the commonly used RMON Groups, is used
to define RMON events. Alarms occur when an event is detected.
Syntax
rmon event index { [ user user-name ] [ description descript ] [ type {none |
log | notify | log-notify } ] [owner owner-name] }
no rmon event index
Parameter
index —— The index number of the event entry, ranging from 1 to 12. You can
only select one entry for each command.
user-name —— The name of the User to which the event belongs, ranging
from 1 to 16 characters. By default, it is "public".
descript —— The description of the event, ranging from 1 to 16 characters. By
default, it is empty.
TL-SL5428E JetStream L2 Managed Switch CLI Guide
280