Access-List Bind(Interface); Access-List Bind(Vlan) - TP-Link JetStream TL-SL5428E Cli Reference Manual

Example
Edit the actions for policy1. For the data packets matching ACL 120, specify the
DSCP region as 30 and local priority 2:
TL-SL5428E(config)#access-list policy action policy1 120
TL-SL5428E(config-action)# qos-remark dscp 30 priority 2

access-list bind(interface)

Description
The access-list bind command is used to bind a policy to a specified port. To
cancel the bind relation, please use no access-list bind command.
Syntax
access-list bind policy-name
no access-list bind policy-name
Parameter
policy-name —— The name of the policy desired to bind.
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Example
Bind policy1 to Fast Ethernet port 2:
TL-SL5428E(config)#interface fastEthernet 1/0/2
TL-SL5428E(config-if)#access-list bind policy1

access-list bind(vlan)

Description
The access-list bind command is used to bind a policy to a VLAN. To cancel
the bind relation, please use no access-list bind command.
Syntax
access-list bind policy-name
no access-list bind policy-name
Parameter
policy-name —— The name of the policy desired to bind.
TL-SL5428E JetStream L2 Managed Switch CLI Guide
196