Show Running-Config; Show Cable-Diagnostics Interface - TP-Link JetStream TL-SL5428E Cli Reference Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for JetStream TL-SL5428E:
- Reference manual (341 pages) ,
- User manual (307 pages) ,
- Cli reference manual (224 pages)
Table of Contents
Advertisement
Syntax
show system-info
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system information:
TL-SL5428E#show system-info
show running-config
Description
The show running-config command is used to display the current operating
configuration of the system or of a specified port.
Syntax
show running-config [ interface { fastEthernet port | gigabitEthernet port } ]
Parameter
port —— The Fast/Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system current operating configuration:
TL-SL5428E#show running-config
show cable-diagnostics interface
Description
The show cable-diagnostics interface command is used to display the cable
diagnostics of the connected Ethernet Port., which facilitates you to check the
connection status of the cable connected to the Switch, locate and diagnose the
trouble spot of the network.
Syntax
show cable-diagnostics interface { fastEthernet port | gigabitEthernet port }
TL-SL5428E
JetStream L2 Managed Switch CLI Guide
147
Advertisement
Table of Contents
Need help?
Do you have a question about the JetStream TL-SL5428E and is the answer not in the manual?