Configuring Unknown Unicast Suppression; Enabling Fast Port Detection Function - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (Basic Configuration Volume)
Step Command
1
ZXR10(config)#
<by-name>}
2
ZXR10(config-if)#
<percent>}|{value <value>}}
Step Command
1
ZXR10(config)#
<by-name>}
2
ZXR10(config-if)#
<percent>}|{value <value>}}
Step Command
1
ZXR10(config)#
<by-name>}
2
ZXR10(config-if)#
48 Confidential and Proprietary Information of ZTE CORPORATION
interface {<port-name>|byname
multicast-limit {{percent
Configuring Unknown Unicast
Suppression
To configure unknown unicast suppression of Ethernet port, per-
form the following steps.
interface {<port-name>|byname
unknowcast-limit {{percent
Enabling Fast Port Detection
Function
To enable fast port detection function, perform the following steps.
interface {<port-name>|byname
zfid interface <port-list>
Note:
This function detects the change of the status on an interface (for
example, from up to down), and informs protocols such as ZESR,
ZESS and link aggregation of the change to speed up the running
of the protocols. As the function costs resource, it is recommended
to enable the function only on related ports.
Function
This accesses port
configuration mode
This configures multicast
suppression of Ethernet port
Function
This accesses port
configuration mode
This configures unknown
unicast suppression of
Ethernet port
Function
This accesses port
configuration mode
This enables fast port
detection function