Show Ipv6 Mroute - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Filed
mr6 data upsend fail
mr6 pim6 upsend suc
mr6 pim6 upsend fail
mr6 pim6 send
mr6 mld upsend suc
mr6 mld upsend fail
mr6 mld send
mr6 pro send

show ipv6 mroute

Use this command to display the content of multicast forwarding
table.
All modes
show ipv6 mroute [[group <group-address>[source <source-
address>]]|[summary]
group <group-address>
source <source-address>
If there is no parameter after this command, then all multicast
routing tables will be displayed.
If there is group option after this command, then this group (*, g)
and all routing entries related with (s, g) will be displayed.
If there are group and source address options after this command,
then the specified (s, g) routing entries will be displayed.
If there is the parameter summary, then only the routing entries
statistic information will be displayed.
The command information descriptions are shown below.
Field
Entry flags
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 7 IPv6 Multicast Protocol
Description
Number of packets unsuccessfully upsent by
mr
Number of packets successfully upsent by pim
Number of packets unsuccessfully upsent by
pim
Total number of packets sent by pim
Number of packets successfully upsent by mld
Number of packets unsuccessfully upsent by
mld
Total number of packets sent by mld
Total number of packets sent by mr
IPv6 multicasting group address,
X:X::X:X
IPv6 source address, X:X::X:X
Description
Status information of forwarding table routing
entries: F means it can be forwarded. U
means it uplinks the protocol. P means the
entries are in the pruning status, and can not
be forwarded
147