Zte ZXR10 Command Manual page 61

Syntax
Description
<update>
<timeout>
<garbage>
This command is disabled by default.
Defaults
To adjust the protocol timer, use this command.
Instructions
This example describes how to adjust the RIPng timer .
Example
ZXR10(config)#ipv6 router rip
ZXR10(config-router)#timers basic 60 360 240
Update time for transmitting packets
periodically in seconds, range: 5~65535,
default: 30 seconds
Time of route's invalidity in seconds, range:
5~65535, default: 180 seconds
Time from invalidity to deletion of the route
in seconds, range: 5~65535, default: 120
seconds
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 RIPng Protocol
49